Manufactured by CHG Bearing, the HKS11003AS0 is a precision Super Thin Section Angular Contact Ball Bearings. Key dimensional parameters include a 110 mm bore diameter, a 116 mm outer diameter, and a 2.5 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKS11003AS0 - Super Thin Section Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKS11003AS0 |
| Separator | Full complement or 1/16 in spacer balls |
| Characteristics | |
| Bearing Type | Angular contact ball bearing |
| Dimensions | |
| Bore Diameter (d) | 110 mm |
| Width (B) | 2.5 mm |
| Outer Diameter (D) | 116 mm |
| Radial Cross Section H | 3 mm |
| Inner Ring Land Diameter L1 / d1 | 112.2 mm |
| Outer Ring Land Diameter L2 / D1 | 113.8 mm |
| Maximum Shaft/Housing Fillet Radius F | 0.25 mm |
| Performance | |
| Dynamic Radial Rating Ck (N) | 814 N |
| Static Radial Rating C0 (N) | 1183 N |
| Thrust Loading Limit Fa (N) | 867 N |
| Material | |
| Material | stainless steel |
| Reference Data | |
| Mass (g) | 16 g |
HKS11003AS0 116 mm 110 mm 2.5 mm Frequently Asked Questions about HKS11003AS0 Super Thin Section Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Standard batches of CHG Bearing HKS11003AS0 conform strictly to ISO Class Normal (ABEC-1). For high-precision machine tool spindles, gearboxes, or robotics requiring tighter runouts, CHG Bearing can provide custom batches graded to ISO Class 6 (P6/ABEC-3) or ISO Class 5 (P5/ABEC-5) with 100% micrometer verification.
The CHG Bearing HKS11003AS0 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
To match diverse operational dynamics, CHG Bearing supplies HKS11003AS0 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
To extend the trouble-free lifespan of CHG Bearing HKS11003AS0, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
